Skip to main content

📱Adyen Castles S1F2 Terminal — Merchant Quick-Start Guide (Standalone Mode)

How to use the Adyen S1F2 terminal in standalone mode: setup, sales, refunds, why voids aren't available, reprinting receipts, and troubleshooting.

This guide is for merchants using the Adyen S1F2 terminal in standalone mode, meaning the terminal is not connected to a POS or cash register system. All transactions are started directly on the terminal screen.


1. Getting to Know Your Terminal

The Adyen S1F2 is a portable, all-in-one payment terminal with a built-in printer. It supports contactless (tap), chip, and swipe payments.

Feature

Details

Screen

5.75" color touchscreen

Printer

Built-in thermal printer

Receipt Paper

57–58 mm wide thermal paper roll (40 mm max diameter)

Connectivity

Wi-Fi + 4G LTE (pre-installed eSIM)

Charging

USB-C cable (included)

Weight

Approx. 495 g

⚠️ No end-of-day close needed: Your terminal does not require a batch close or manual settlement. Settlement happens automatically every day.


2. First-Time Setup

Charging the Terminal

Before first use, charge the terminal fully using the included USB-C cable. Allow at least 4 hours for a complete charge. The battery icon on the top-right of the screen shows the charge level.

Loading Receipt Paper

The S1F2 uses 57–58 mm wide thermal paper rolls. Use only thermal paper, as regular paper will not print.

  1. Locate the paper compartment door on the back of the terminal.

  2. Lift or slide open the paper compartment cover.

  3. Place the paper roll inside so the paper unwinds from the underside of the roll.

  4. Feed the loose end of the paper toward the top edge of the terminal (toward the screen).

  5. Close the compartment cover firmly until it clicks into place.

  6. Tear off any excess paper. The terminal is ready to print.


3. Processing a Sale

  1. On the home screen, tap Payment.

  2. Enter the transaction amount using the on-screen keypad (e.g., 25.00 for $25.00).

  3. Tap Confirm.

  4. Hand the terminal to your customer.

  5. The customer pays by tapping their card, phone, or watch on the screen, inserting their chip card at the bottom, or swiping on the side.

  6. The customer follows any on-screen prompts (e.g., entering their PIN).

  7. A green screen means approved. A red screen means declined, so ask the customer to try a different card.

  8. The terminal prints a receipt automatically.


4. Processing a Refund

There are two ways to issue a refund. Use a Referenced Refund whenever possible.

Option A: Referenced Refund (Recommended)

Use this when the original transaction was processed on this terminal.

  1. Tap Transactions on the home screen.

  2. Find and tap the original transaction.

  3. Select Refund.

  4. Confirm the refund amount (adjust only if doing a partial refund).

  5. Tap Confirm. A refund receipt will print.

Option B: Unreferenced Refund

Use this only if the original transaction isn't available in the terminal history.

  1. Tap Transactions on the home screen.

  2. Tap New Transaction.

  3. When prompted, enter your refund passcode. If you don't have it, ask your support team. For security, keep this passcode limited to managers and don't share it with customers.

  4. Select Refund.

  5. Enter the refund amount and tap Confirm.

  6. Hand the terminal to the customer so they can present the original card.

  7. A refund receipt will print once approved.

ℹ️ Refunds don't have an authorization code. That's normal across the payments industry. For your records, use the PSP Reference printed on the refund receipt.


5. Voiding a Transaction: Not Available

⚠️ Voids aren't available on the S1F2 in standalone mode.

Payments on this setup are captured within seconds of being approved. A void only works on a payment that's been approved but not yet captured, so by the time you'd try to void, the payment has already been captured.

What to do instead: process a Refund (see Section 4). Refunds typically appear on the customer's statement within 3–5 business days, depending on their bank.

Situation

What to Do

Transaction processed in error

Process a Refund

Customer changed their mind right after paying

Process a Refund

Wrong amount charged

Refund the original amount, then run a new sale for the correct amount


6. Reprinting a Receipt

  1. Tap Admin on the home screen.

  2. Select Transactions, then History.

  3. Find and tap the transaction you need.

  4. Select Receipts.

  5. Choose Customer Receipt or Merchant Receipt.

  6. Tap Print.


7. Settlement: Nothing to Do

  • Transactions are captured automatically throughout the day.

  • They're settled automatically at the close of each sales day.

  • Deposits go out on business days, so weekend sales are paid out on the next business day. See When Do I Get Paid?

  • You can see your deposits in the ValPay Portal.

Just make sure the terminal is charged and connected to Wi-Fi or 4G each day.


8. Troubleshooting Quick Reference

Issue

Solution

Terminal won't turn on

Charge via USB-C for 30+ minutes, then hold the power button for 5 seconds.

Receipt not printing

Check the paper is loaded correctly (it must unwind from the underside) and the cover is fully closed.

Paper prints blank

Make sure you're using heat-sensitive thermal paper.

Card not reading

Try tap, then chip, then swipe. Clean the reader if debris is visible.

Transaction declined

Ask the customer to try a different card. Don't retry the same card over and over.

No Connection message

Check Wi-Fi. The terminal falls back to 4G if Wi-Fi is unavailable. See Troubleshooting "Not Connected".

Can't find transaction history

Go to Admin > Transactions > History. You can search by date and amount.

Terminal freezes

Hold the power button for 10 seconds to restart. Completed transactions are stored online, so nothing will be lost.


9. Daily Checklist

Start of Day

  • ✅ Terminal is charged

  • ✅ Paper roll is loaded and printing clearly

  • ✅ Wi-Fi or 4G connection is active (check the top status bar)

End of Day

  • ✅ Plug the terminal in to charge overnight, and leave it on so it can receive updates

  • ✅ Store the terminal somewhere secure

  • ✅ No settlement action needed


10. Need Help?

If you can't resolve an issue using this guide, contact your support team. That's the team that set up your account or the one you normally contact for help. Have the following ready:

  • Terminal serial number, found on the sticker on the back of the terminal

  • Your business name

  • What's happening and when it started

  • PSP Reference, if the issue involves a specific transaction (it's on the printed receipt)

Did this answer your question?